![]() An idling blank board consumes around 0.2A from the 5V input supply. This should provide enough power for lower complexity designs. ![]() An overview of the power circuit is shown in Fig.2Ī USB 2.0 port can deliver maximum 0.5A of current according to the specifications. The power indicator LED (LD11) is on when all the supply rails reach their nominal voltage. There is a diagram on the board silkscreen indicating all three.Īll on-board power supplies are enabled or disabled by the power switch SW4. There are three valid configurations for this jumper corresponding to the three powering options: USB, wall wart with barrel jack, and battery pack. Jumper JP7 (near the power switch) determines which power source is used. The ZYBO can be powered from the Digilent USB-JTAG-UART port (J11), or from an external power supply. Digilent does not have many materials to support this, but you can always ask for help on the Digilent Forum. Those familiar with the older Xilinx ISE/EDK toolsets from before Vivado was released can also choose to use the ZYBO in that toolset. Digilent provides a video capable SDSoC platform for the ZYBO that is available from the ZYBO Resource Center. For more information on SDSoC, see the Xilinx SDSoC Site. The ZYBO can also be used in Xilinx's SDSoC environment, which allows you to design FPGA accelerated programs with ease in an entirely C/C++ environment. For more information, see the ZYBO Resource Center. To help you get started, Digilent provides a Petalinux project that will get you up and running with a Linux system quickly. Zynq platforms are well-suited to be embedded Linux targets, and ZYBO is no exception. The Logic Analyzer assists with debugging logic, and the HLS tool allows you to compile C code directly into HDL. As of Vivado release 2015.4, the Logic Analyzer and High-level Synthesis (HLS) features of Vivado are free to use for all WebPACK targets, which means you no longer need to use a voucher to unlock them with the ZYBO. It can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs. This toolset melds FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. The ZYBO is fully compatible with Xilinx’s high-performance Vivado Design Suite. USB Scopes, Analyzers and Signal Generators.Easy installation and configuration: installs directly in the printer.Speeds up to 100 Mbps: streamline your POS system and enjoy faster transactions.Standard TCP/IP protocol: seamless integration with virtually any POS system.Communication standards: supports IEEE 802.3 and IEEE 802.11 b/g/n.Built-in USB port: supports wireless adapter connectivity.ePOS Print Service: enables printing from web- and cloud-based POS applications, as well as mobile devices.Versatile Connect-It Ethernet module: the perfect choice for Epson POS printers Features a built-in USB port to support wireless connectivity using an Epson wireless adapter. The Ethernet interface for Epson POS printers, providing ePOS Print Service support for mobile devices, plus web and cloud-based applications. Ethernet Interface for Espon TM Series Printers, for use with mobile, cloud and legacy POS systems
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |